Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED MASONRY SEALERS SANDING SEALERS
FABRIC SEALERS/WATERPROOFERS
Sort By:
Page of 3
CLNR ETCH/CONCRT PRE-MXD 355ML PRIMER SEALER INTR CEIL 454 G PRIMER SEALER ODORLESS 369G
For use on concrete & masonry to remove tough, caked-on efflorescence and excess mortar build-up. Provides a light surface etch to promote the coating penetration and adhesion. Seals deep cracks and holes. Adheres to wet surfaces. Zinsser Ceiling Paint, 454 g, Aerosol Can Packing, Liquid, White, Solvent Like Odor/Scent, 0.931 Specific Gravity, -156 Deg F Flash Point Zinsser Stain Blocker, 369 g, Aerosol Can, Oil Base, Alkyd Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 820 sq-ft/Gal Theoretical Coverage At 1 mil DFT Coverage, 1 hr to Touch, 2 hr to Recoat, 7 Days Full Scrape Cure Drying Time, Application Method: Spray, 106 Deg F Flash Point, 350 g/l VOC, 12.5 pH, 40 - 90 Deg F, Suitable For Use With: Oil, Latex Topcoat  Old Alkyd Paints and Varnishes or Left uncoated For a Bright White, dead-flat Finish, For Residential Remodeling, Commercial Maintenance or Repainting Projects in Schools, Restaurants, Offices or Other Public Places
PRMR INTR/EXTR 369G AERO WHT  PRMR INTR/EXTR 369G AERO WHT  PRIMER/SEALER I/E MLT-PRPS QT
Bulls Eye 1-2-3 is a whole-house, universal interior and exterior, water-based stain-blocking primer-sealer. Excellent adhesion to glossy surfaces, including tile and enamelled trim. Low odour and easy-to-apply with great flow and levelling. Breathable, f Seals water, smoke & nicotine stains. Ideal for construction and remodeling work as well as repainting. May be used under any oil-base or waterbase topcoat. Covers 37 - 41.8 square meter per 3.7 L container. Recoat in 2 hours.
PRIMER SEALER INTR EXTR 946 ML PRMR INTR/EXTR WTR BSD 902ML  Sherwin-Williams THC050502-18 Fabric Seal
Zinsser Primer Sealer, Series: Bulls Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 450 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.26 Specific Gravity, >200 deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 deg F, Suitable For Use With: Synthetic Brush, Roller, Sprayer Designed to accept up to 6 oz of colorant per gallon to tone the surface towards the finish color and increase hiding power of the topcoat. Improves the coverage of dark color topcoats. Seals and tones the surface. Use over or under any paint. Covers approximately 37 -41.8 sq m per 3.6L container. Sherwin-Williams Fabric Seal, 326 g, Liquid, Clear, 60 sq-ft Coverage, Solvent Odor/Scent, 60 deg C Flash Point, Media: Water Spray, Fog or Mist, Foam, Composition: Hydrocarbons, C11-C12, Isoalkanes, Aliphatic Hydrocarbons, For Interior and Exterior Fabrics, Tents, Gazebos, Cushions, Clothes and Umbrellas
PRIMER ODOR KILLING 340G      PRIMER SEALER OIL BASE 946ML  PRIMER INTR WHITE ALKYD  946ML
PRIMER ODOR KILLING 340G
Our Price: $17.99
Seals water, smoke & nicotine stains. Ideal for construction and remodeling work as well as repainting. May be used under any oil-base or waterbase topcoat. Covers 37 - 41.8 square meter per 3.7 L container. Recoat in 2 hours. Rustoleum Primer Sealer, Series: B-I-N 2, 946 ml Capacity, Soya Base, Liquid, White, Alcohol Odor/Scent, 400 sq-ft Coverage, 20 min Drying Time, Application Method: Brush, Roller or Pad, 63 deg F Flash Point, <550 g/l VOC, 40 - 80 deg F, 500 cPs
PRIMER SEALR SHELLAC BIN 473ML PRIMER SEALER SHELLAC BIN 369G UNDERCTR PRIMER/SEALER EXT QT
BIN is the original pigmented shellac-based stain-killing primer-sealer. Great on knots, water stains, fire and smoke damage. Best interior new wood primer. Dries in minutes; recoat in 45 minutes. Seals in tough stains, pet, smoke and fore odours. Great u White pigmented. Permanently seals in every stain and new wood even knots and sap streaks. Sticks to any surface without sanding. Hides water stains, graffiti, seals out smoke and pet odors. Fast-drying. Topcoat with either oil or latex paint. Covers 47 square meters per 3.7 L container.
Drylok 27512 Latex Based Masonry Waterproofer PRMR INTR OIL BSD 946ML WHT   PNT RECYCLED INTR 3.78L WHT
Drylok Masonry Waterproofer, Latex Based, Series: 27512, White, 1 qt Capacity, Container Packing, 120 - 130 KU Viscosity, 75 - 100 sq-ft/gal Coverage, <50 deg F, 100 g/l VOC, 9.5 - 9.9 pH, 1.5 Specific Gravity, Typical Amine Odor/Scent, Application Method: Nylon Bristle Brush, Roller or Spray, Resists: Hydrostatic Pressure and Wind Driven Rain Rustoleum Primer Sealer, Interior/Exterior Multi-Purpose, Series: Bulls Eye 1-2-3, 946 ml Capacity, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 35 min Drying Time, Application Method: Brush, Roller or Pad, 1.594 Specific Gravity, 106 deg F Flash Point, 338 g/l VOC, 50 - 90 deg F, For Cement, Metal Interior recycled acrylic primer for new or acrylic painted surfaces.  Can be used in any room of the house, walls and ceiling.
Minwax CM6570000 Low VOC Professional Sanding Sealer PRMR INTR/EXTR 946ML WHT      PRIMER SEALER BONDZ 946ML
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be topcoated with any Minwax oil or water-based polyurethane finish. Stops peeling paint by gluing down worn paint edges from previous paint jobs that can lead to topcoat cracking. Creates a smooth finish. Seals weathered surfaces. Dries white. Topcoat in 2 hours. Covers 5-19 sq m per 3.78L container. Zinsser Primer Sealer, Series: Bondz, Maximum Adhesion, 946 ml, Water Base, Liquid, White, Solvent Like Odor/Scent, 1 hr Drying Time, 1.213 Specific Gravity, 94 deg C Flash Point, 84 g/l VOC, For Interior/Exterior Use
PRIMER SEALR SHELLAC BIN 946ML PRMR INTR/EXTR 3.78L          SEALR MASON STN CNCRT 3.78L
PRMR INTR/EXTR 3.78L
Our Price: $32.99
BIN is the original pigmented shellac-based stain-killing primer-sealer. Great on knots, water stains, fire and smoke damage. Best interior new wood primer. Dries in minutes; recoat in 45 minutes. Seals in tough stains, pet, smoke and fore odours. Great u Prime-it' Revolutionary universal, sandpaper and primer all-in-one. Acrylic, the only Primer that totally eliminates the need for sanding glossy surfaces. It provides an ideal undercoat for both latex and oil paints and allows you to paint glossy over semigloss, oil over latex, oil over oil, latex over oil paint. Allows you to paint ceramic tiles, formaica, aluminum and galvanized steel. Use on drywall, new plaster and bare wood. Economical, twice the coverage of conventional primers. Dries in 20 minutes, ready for painting in 4 hours. Water based concrete sealer. Seals and protects. Cures concrete. Dust proof, paintable. Premium concrete sealer is extremely durable, exterior/interior, water bases acrylic sealer specifically formulated with a high concentration of acrylic polymer to give superior protection and help maintain the fresh appearance of concrete flours, paving stones, quarry tiles, masonry, concrete blocks and bricks. It helps reduce dust accumulation and resists spills. Contains u.v. reducer to, reduce colour fade. Apply by roller or un-pressure sprayer.
PRIMER ODOR KILLING 946ML     WTRPRFR MSNRY 3.78L DRYLOK WHT WTRPRFR MSNRY 3.78L DRYLOK GRY
PRIMER ODOR KILLING 946ML
Our Price: $37.99
Latex Base. Low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, concrete swimming pools and foundations. No pre-mixing or pre-wetting necessary. Clean up with soap and water. Applies easily with brush and / or roller. Five year warranty. Latex Base. Low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basements, concrete swimming pools and foundations. No pre-mixing or pre-wetting necessary. Clean up with soap and water. Applies easily with brush and / or roller. Five year warranty.
King 12051005 Xypex - High-N-Dry Concrete Waterproofing MSNRY WTRPRF 1G/3.78L LTX BLU PRMR LATEX INTR 3.78L WHT
For waterproofing bare concrete surfaces such as basement walls, floors, tunnels, storage tanks, cisterns, ponds, swimming pools, etc. Premium quality, non-soluble, surface-applied, permanent, chemical waterproofing treatment. Crystalline growth prevents water seepage due to hydrostatic pressure. Mix and substrate temperatures should be maintained between 5 and 30 degrees C for at least 24 hours prior to and 48 hours after. Concrete must be fully cured and dry before painting. 1 KG yields approximately 1.25 sq m. Latex Base.  Low odor, water clean-up formula for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco, brick,  retaining walls, basements, concrete swimming pools and foundations.  1 gallon/3.78L. A quality interior latex primer / sealer formulated to give exceptional sealing properties. Ideal for new drywall. Easy to apply, good flow and leveling, low odor, good hiding ability, dries quickly and has excellent sealing. Dries in 4-6 hours.